Видео

don't know if anyone else caught this - at the start you said M28 while referencing G28 and said M29 while typing G29.

Id love them to make the AMS open source so i could use it with 3rd party 3d printers, even if it was limited to something like Klipper.

I think another way Bambu can save on poop is to cut the filament early. Imagine if it cut the filament before it needed to and then continued to print with the cut filament until the cut line was near the melt chamber. It may be less reliable since the filament is cut, but i think it's worth looking into

Was the tie a 3D print?

Zero Purge Waste is not just possible however inevitable The nozzle however needs to be modified not the gcode The nozzle stratification as you mentioned explains it all A hole needs to be drilled into the nozzle at the upper stratification A pipe with a liquid pump is inserted into the nozzle Thus when a new color is required the AMS system prompts the cleaning thank to flush the nozzle by running liquid through it after which the new color is introduced. The toilet tank or flushing system also does not waste liquid as it is reused several times over I believe in supporting a green environment and this will help a lot in promoting zero emissions Sincerely Ejike

why no makerworld?

dear youtuber i like the info you provide, but i will subscribe because of the wholesome personallity, keep it up hello from colombia

You must be a Colorado native since you said it right lol

TY for the video but are the purge blocks NOT waste? It all seems to be about the same waste no matter what you do.

Just started to get into 3d printing and I think I found a perfect playlist All it took me was 1 minute and I was convinced and you are still active too, thats amazing

should be able to add two flushing objects.. one to purge old colour and one to start the new colour. hopefully that would get rid of the poop

Professor, wow

Thank you for this fantastic video! We want to share some exciting updates: The software you demonstrated has been updated to Revo Scan 5, making it even more intuitive and efficient for both scanning and post-processing. POP 3 came out last year and brings some great improvements over its predecessor, POP 2.

You can get a Bambu A1 mini for $199 now. Pretty much a slam dunk at that price point

I've never had a mouse with a scroll wheel button (/middle mouse button) that worked well and felt good to use tbh. And I've had a lot of different kinds of mice.

Thank you, exactly what I was searching for!

yesssssssss

Prusa Mk4 should be in the Pro category too, it’s great! Building the kit is even more fun!

someone who saw a 3d printer and thought "I want that" and then they got it

OF COURSE YOU WON'T BE BIAS..

I love your veggie tales tie, 10/10

As of this writing, this video is 3 years old and I'm using Blender 4.1, but the idea is still there and I finally was able to add a wood texture to objects! Thank you very much!

is cloud/service netfabb shut down?

Surely the purge could be used as infill on the next layer on certain models?

me. im the beginner

I always wanted to play with Blender, but never had any reason for that. I bought a 3D printer now, and your tutorials are making this with a reality. Thanks!

I got into 3D printing as a necessity of belonging to the FPV drone community n the twenty-teens. I thought everybody knew how excellent it is. You can get it noodle-soft like Ninjaflex, or super rigid like Armadillo.

The use in terms when discribing materials needs a lot of improvement in 3D printing community. TPU is not strong, it is tough. PLA/PLA+/PETG are strong materials as they have highest tensile strenghts. PLA is hardest and most brittle material. Obviously all of these properties change quite a bit between different brands. As a designer you choose the material according to the use case. In exaggeration, you don't choose TPU/rubber if you need the strength of steel.

"Marital aid." 😂🤣😂🤣

My favourite Technique is still "Purge to infill". Since you generally can't see the inside, it doesn't matter if the infill is funky colored, but you need the infill anyways, so might as well use the purge.

Okay make a gun part in tpu

I don't use flush towers or objects. You can turn it off on my X1C carbon. I also reduced the multiplier to .3 to get the smallest poop as possible.

My first ever printer is the anycubic kobra 2 neo. I got it printing out of the box, and I’m currently learning how to use octoprint to calculate e steps and all kinds of stuff. The hobby is kinda overwhelming, but if I could learn to airbrush with acrylics I can do this. TIP DRY

Purgefect results 😅

Really good analysis and the pros and cons. I have followed 3D scanning and it is not yet where I want to jump into it, cost vs the need are too far apart

I have supported Revopoint on Kickstarter and have had every version of scanner produced by them. Each time a new version came out I moved on the version I had and was able to understand the improvements made with each new version. As well as the constant upgrades to the equipment, the software has constantly been improved and the scanning process has continued to improve. I have had a number of other 3d Scanners before the Revopoint programme started, but none of them were anywhere near as good as the Revopoint experience. I currently have the Mini , Range and Miraco versions so am able to cover a good range of scanning sizes.

Automatic Material System system.

How does it compare to Photogrammetry?

I was wondering rather than a purge object could you make a section of an object material neutral. I.e. you might have an object that is big enough that the infill could use the purge waste?

My revopoint had a ssh backdoor with a root password of “internet” so I stopped using it and uninstalled their software because I could not trust a company with such poor security practices

Did you scan your head with this scanner? What is the largest optimum size object it can scan?

Can we get a follow up video to this one, now that 1.9 has the reduced filament purge options, as well as perhaps a way to determine how PrintaBloks you should use for a given print? If such a video exists, I couldn't find it, but if not, I'm sure the 3D Printing Professor has this information dialed in by now. :)

I got the Revopoint Inspire for half the price of a Pop 3. Only difference I see is Pop 3 has 0.1mm accuracy and Inspire has 0.2mm accuracy. I don't feel like I'm missing out on detail. I've been pretty happy with it.

Biqu cyclop used free/open source SW.

Tell him about ferret CE which I got for 220 euros with the same featureset and higher scan framerate...

Even though it's only $700, it's hard to justify for something that I would hardly ever use. It would be cool if office supply stores or libraries would have one that you could either rent or use on site.

Great review! I recently got the 3DMakerpro Seal, and turntable. its seems pretty good...much better than the Makerbot Digitizer collecting dust in the basement. Please take a moment and read this article from techcrunch: "The Makerbot Digitizer Is Nearly Magic", it captures why I like this sort of stuff even when it "sucks":..It puts my brain into a happy space... like when I sit and watch TRON.... A lovely creator "Magabootoys" leaned into the "suckiness" of 3D scanning- he has scanned Star Wars figures and then printed and cast copies, and they are terrible and also wonderful. Have a great weekend!

Best review/discussion I've seen on this topic. Thank you!

have you looked at creality scanners? not sure if chicken and egg, but the revopoint and creality scanner lines look to be the same solutions, just different brands